Sublimation Study of BiCl3 


Vol. 39,  No. 5, pp. 384-392, Oct.  1995


PDF
  Abstract

BiCl3의 승화압과 엔탈피를 370.6에서 488.8K까지 Knudsen 유출법을 사용하여 측정하였고, 또한 438.2에서 495.7K까지 Torsion 유출법에 의해 추가 실험을 하였다. 평형 승화압도 이 안정상태 데이타로부터 구하였다. ΔsubH0298.15와 ΔsubS0298.15의 상관관계를 이용하여, 추천할 수 있는 p(T) 식을 BiCl3(s)에 대해 아래와 같이 구하였다. BiCl3(s); log(p/Pa)=-C/(T/K)-2.838log(T/K)-8.097×10-2(K/T)2+22.588, 여기서 p는 파스칼, T는 절대온도, ΔsubH0298.15의 단위는 kJmol-1이고, C=(ΔsubH0298.15+5.9988)/1.9146×10-2이다. 응축상수와 그것의 온도 의존성도 위의 두 방법에 의한 실험으로부터 유도하였다. Steady-state sublimation vapour pressures of anhydrous bismuth trichloride have been measured by the continuous gravimetric Knudsen effusion method from 370.6 to 488.8 K. Additional effusion measurements have also been made from 438.2 to 495.7 K by the torsion effusion method. Based on a correlation of ΔsubH0298.15 and ΔsubS0298.15, a recommended p(T) equation has been obtained for BiCl3(s); log(p/Pa)=-C/(T/K)-2.838log(T/K)-8.097×10-2(K/T)2+22.588, where p is in Pa, T in Kelvin and ΔsubH0298.15 in kJmo1-1 and C=(ΔsubH0298.15+5.9988)/1.9146×10-2. Condensation coefficients and their temperature dependence have been derived from the effusion measurements.

  Statistics
Cumulative Counts from November, 2022
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.


  Cite this article

[IEEE Style]

J. Kim and S. Blairs, "Sublimation Study of BiCl3," Journal of the Korean Chemical Society, vol. 39, no. 5, pp. 384-392, 1995. DOI: .

[ACM Style]

J.H. Kim and S. Blairs. 1995. Sublimation Study of BiCl3. Journal of the Korean Chemical Society, 39, 5, (1995), 384-392. DOI: .